Digital Oscilloscopes

SDS1000X-E Series

SDS1000X-E

Bandwidth

200 MHz

Real time sampling rate

1 GSa/s

Channels

2 + EXT/4

SDS1000X-E

SDS1000X-E

Created with Pixso.

Product Introduction

SDS1000X-E series is a high-quality product launched by SIGLENT for economical market. It provides 70 MHz to 200 MHz bandwidth, 1 GSa/s sampling rate and rich trigger options to ensure the accuracy and reliability of test results. It is an ideal choice for beginners and users with limited budget.

Key Features

  • 2 + EXT/4 channels,1 GSa/s Real time sampling rate
  • Bandwidth:100 MHz、200 MHz
  • 1 Mpts FFT
  • True measurement and math can use all 14 Mpts of memory
  • Free Serial bus triggering and decoding:IIC, SPI, UART, RS232, CAN, and LIN
  • 选配MSO,16路数字通道

Product advantage

Deep Memory Depth, High Capture Rate

Digital trigger system, high trigger sensitivity and low jitter
256-level Intensity Grading and Color Temperature Display
With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the transients or low-probability events
Using max record length of up to 14 Mpts, users are able to oversample to capture for longer time periods at higher resolution

Revolution in Data Analysis Processing

True fast measurement and math to all of 14M sample points so that there is minimal distortion on analysis
With hardware co-processor, faster data operations
1 M point FFT operation
Support Zoom, Gating, Math measurement and statistics
Support 38 automatic measurement functions

Power Loop Response Analysis / Bode Plot (4-channel series only)

Stability is a very important indicator in power supply design. In general, stability measurement requires a special frequency response analyzer, but it is very expensive. Siglent offers an affordable solution: SDS1000X-E oscilloscope and signal source Power loop measurement with standard Free Bode Plot II software.

  • · higher measurement sensitivity and accuracy
  • · Variable excitation scan mode allowed for complex test scenarios of the power control loop test box
  • · User-friendly UI design
  • · List and cursor measurements, more intuitive

Standard Serial Decoding

Most oscilloscopes on the market do not offer serial decoding for free but SDS1000X-E does. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN.

The waveform and data can be displayed at the same time and the detailed decoding information is displayed in the form of a list, and the data can be stored and exported.

Powerful Debugging and Analysis Capabilities

Event search and navigation to quickly locate events of interest.
MSO logic analyzer integration, mixed signal analysis tool
The combination of history and sequence mode, quickly capture abnormal waveforms
Hardware-based Pass/Fail mode for long-term monitoring signals

Remote Control via Web Pages

With built-in Web Server, there is no need to install driver software and PC software. You can control the instrument, observe waveforms, obtain measurement results using the browser remotely. Especially when instruments used in high pressure, high temperature and other special environments. The SDS1000X-E supports both web and mobile web layouts, making it easier to control the instrument even on your phone.

Product parameter

对比数据 SDS1000X-E Keysight DSOX900G Tektronix TBS2000
模拟带宽 70 - 200 MHz 50 - 200 MHz 70 - 90 MHz
通道数 2/4 2/4 2/4
最高实时采样率 1 GSa/s 2 GSa/s 1 GSa/s
最高波形捕获率 400,000 wfm/s 50,000 wfm/s N/A
最大存储深度 14 Mpts 1 Mpts 20 Mpts
FFT数据处理 1 Mpts 64 kpts 512 kpts
串行触发及解码 标配 选配 不支持
辉度及色温显示 256级辉度及色温显示 256级辉度,不支持色温显示 不支持
分段存储功能 支持 50段 不支持
历史波形记录及分析 支持,80,000帧 不支持 不支持
信号源功能 支持,25 MHz 支持,20 MHz 不支持
波特图功能 支持 支持 不支持
MSO功能 支持 不支持 不支持
屏幕 7英寸(800*480) 7英寸 9 英寸
价格 ¥3,480 起 $876 起 $1,200 起

*NOTE: The above prices and parameters were collected on the official website of each brand on July 19, 2019. If there are any differences, please refer to the offical website.

Configure your instrument

Add to Compare 产品型号模拟带宽通道数垂直分辨率最高实时采样率最大存储深度最高波形捕获率 Price  

Resources

Hide Created with Pixso.
Baidu
map