Arbitrary Waveform Generator

SDG7000A Series

SDG7000A

Max Output Frequency

1 GHz

Max Sampling Rate

5 GSa/s

Vertical Resolution

14-bit

SDG7000A

SDG7000A

Created with Pixso.

Product Introduction

As a high-performance signal source, SDG7000A series not only inherits all the advantages of SDG6000X series, but also optimizes the user interface and expansibility. Multi-channel synchronous output is supported to meet the synchronous test requirements in different scenarios. Its excellent performance and flexible configuration make it the first choice tool in scientific research and production.

Key Features

  • Max Output Frequency 1 GHz
  • High-performance sampling system with 5 GSa/s sample rate and 14 -bit vertical resolution
  • Dual-channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus outputs (optional)
  • Generates vector signals with up to 500 MS/s symbol rate
  • The 24 Vpp analog output is superimposed with ± 12 Vdc offset to provide a maximum output range of ± 24 V (48 V)

Product advantage

Simplify Signal Creation and Accelerate Test

· SDG7000A and SigIQPro signal generation software integrate simulation, design and test to easily meet the needs of users at all stages of design, R&D, and production.
· SigIQPro is a flexible PC-based signal generation software that takes signal generation to a whole new level, supporting Bluetooth, IoT, Custom OFDM, Custom IQ, and in the future, 5G NR, LTE and WLAN, and more.
· SigIQPro is specially developed for easy generation of protocol and modulated signals, with a user interface that supports intuitive operation and provides relevant documentation that makes it easy to create standards-compliant waveforms for a wide range of applications.
· TRY BEFORE YOU BUY! SigIQPro provides 30 free trials of each feature for unrestricted use of the functions with your existing compatible signal generators.
· SigIQPro_UserManual
• Click to view more about SigIQPro signal generation Software
· Click to download SigIQPro signal generation Software

Multi-functional Waveform Generator

· SDG7000A series integrates multiple waveform generator functions from DC to continuous waves up to 1 GHz, which can replace RF signal generators in some applications. It adopts Siglent’s TrueArb point-by-point arbitrary waveform generation technology, which enables user-adjustable output sample rates from 0.01 Sa/s to 2.5 GSa/s with excellent jitter performance and the generation of I/Q vector signals with a maximum settable bandwidth greater than 500 MHz. Using the benefits of Siglent’s EasyPulse architecture, a low jitter pulse with a minimum pulse width of 1 ns can be generated.
· 采用了鼎阳的TrueArb逐点任意波形发生技术,可以在0.01 Sa/s ~ 2.5 GSa/s的范围里任意设置采样率,输出低抖动的任意波;
· 可以产生I/Q矢量信号,最大可设置的带宽超过500 MHz;
· 基于EasyPulse脉冲发生技术,可以产生脉宽最小只有1 ns的低抖动脉冲;
· 可以产生带宽可调的高斯噪声;
· 可以产生伪随机码;
· 另外提供16路数字信号输出

Excellent Arbitrary Waveform Generation

AFG Mode uses traditional DDS technology to generate arbitrary waveforms
AWG Modeuses the innovative TrueArb technology, with an adjustable sample rate from 0.01 Sa/s~ 2.5 GSa/s and jitter less than 20 ps. It not only has all the advantages of traditional DDS technology, but also overcomes its intrinsic jitter and distortion defects.
分段编辑和播放 The flexible platform also provides zero order hold, linear and sinc interpolation methods for increased flexibility when creating complex waveforms.

Vector Signal Output (Optional)

The SDG7000A can generate common modulation types of IQ signals, such as ASK, FSK, PSK, QAM. With the innovative resampling technology, excellent EVM performance can be obtained at any symbol rate between 250 S/s ~ 500 MS/s. The built-in digital quadrature modulator can modulate the carrier of the IQ signal to any frequency between 0 Hz~1 GHz. The software can be used to generate and edit various types of IQ signals.

Ability to generate complex signals

16-channel digital outputs Purchase the corresponding digital bus suite, which can realize 16-channel LVTTL or LVDS outputs, and the bit rate can be set arbitrarily in the range of 1 μ bps to 1 Gbps, and the mixed signal output can be realized with analog channels.
Modulation supports AM, FM, PM, FSK, ASK, PSK, DSB-AM and PWM, and there are three modulation signal sources: internal, external and channel.
Sweep frequency and pulse train sweep frequency support “linear” and “logarithmic” sweep modes, and pulse train supports “N-cycle” and “gating” Burst modes. Sweep frequency and pulse train support three trigger sources: internal, external and manual.。
Harmonic Through the custom harmonic setting, the nonlinearity of the signal can be simulated.

Product parameter

Configure your instrument

Add to Compare 产品型号最高输出频率最高采样率垂直分辨率任意波长度通道数 Price  

Resources

Hide Created with Pixso.
Baidu
map