Contact Us Created with Pixso.
Created with Pixso.
Trial
Created with Pixso.
Resource Center
Created with Pixso.
Issue Reporting
Created with Pixso.
Customer Service
Contact Us
Created with Pixso.

Programmable DC Electronic Loads

SDL1000X Series

SDL1000X

Max input

DC 150 V/30 A

Readback resolution

0.1 mV/0.1 mA

Max Input Power

200 W/300 W

Created with Pixso.
Created with Pixso.
Created with Pixso. Quote
Created with Pixso. Datasheet
Created with Pixso. Video

SDL1000X

SDL1000X

Created with Pixso.

Product Introduction

SDL1000X series high-performance programmable electronic loads are specially designed to meet the requirements of high-precision testing. Support DC
150 V/30 A, the maximum total power can reach 300 W/200 W, suitable for a variety of test scenarios. Its core features include adjustable current rising/falling rate as high as 0.001 A/μs~2.5 A/μs, ensuring accurate and fast testing. This series provides four static/dynamic modes (CC/CV/CP/CR), especially continuous, pulse and flip modes in CC dynamic mode, which provides strong support for dynamic testing.

Key Features

  • DC 150 V/30 A, total power up to 300/ 200 W
  • Adjustable current rise time range: 0.001 A/us~2.5 A/us
  • 4 static modes / Dynamic mode: CC/CV/CR/CP
  • CC动态模式：连续模式、脉冲模式、翻转模式
  • Min. readback resolution: 0.1 mV, 0.1 mA

Product advantage

Excellent Dynamic Characteristics, Can Simulate High-speed Current Changes

The dynamic test function allows the load to switch between the two set parameters according to the set rules, thereby testing the dynamic characteristics of the device under test. The SDL1000X can be set to a maximum frequency of 25 kHz in CC dynamic mode. The current probe can track current changes at high speed and analyze current waveforms. In CV mode, the voltage can be quickly and stably set to test the fast output capability of the power supply. If the instantaneous power exceeds the protection set value, it will enter the hiccup protection state.

Support 50-step Automatic Programming Test

The Program function can simulate multiple tests such as CC, CV, CR, CP, LED, etc. A total of 10 test files can be edited, and each test file supports up to 50 steps.

Support 100-step List Test

The List function supports load-built multi-step, timed, and test environments with different load states. By editing the step values, pulse widths, and slopes of a single step, the load can generate a variety of complex sequence combinations to meet different test needs.

CR-LED Test Function

Based on the traditional CR mode, the SDL1000X adds the turn-on voltage setting of the diode, which can simulate the working state of the real diode and measure the chopping current during the LED test.

Battery Test Function

The battery test function can effectively reflect the reliability and remaining life of the battery. The battery was subjected to a discharge test by setting termination conditions such as termination voltage, discharge capacity, and discharge time using CC, CP, and CR modes.

Product parameter

View All Parameters
Created with Pixso.
对比数据 SDL1000X 泰克 2380-120-60
输出 150 V /30 A /200-300 W 120 V/ 60 A/ 250 W
工作模式 CC/CV/CP/CR CC/CV/CP/CR
CV模式精确度 ±(0.05% + 0.025%FS) ±(0.05% + 0.025%FS)
CC模式精确度 ±(0.05% + 0.05%FS) ±(0.05% + 0.1%FS)
CR模式精确度 0.01% +0.0008 s 0.01% +0.0008 s
CP模式精确度 0.1% + 0.1%FS 0.2% + 0.2%FS
回读分辨率 0.1 mV/0.1 mA 0.1 mV/0.1 mA
电流上升速率 0.001 A/μs~2.5 A/μs 0.001 A/μs~2.5 A/μs
最大动态频率 25 kHz 25 kHz
保护功能 过压/过流/功率过载/温度过高/反向电压保护 过压/过流/功率过载/温度过高/反向电压保护
趋势图功能 支持 不支持
测试功能 短路/电池/CR-LED/OCP/CPP 电池/CR-LED/电压上升下降时间/OCP/OPP
电压/电流监控 支持 支持电流监控
补偿功能 支持 不支持
List功能 支持 支持
接口 RS232/USB device/LAN/ USB-GPIB(选配) GPIB、USB device、RS232
屏幕 3.5 英寸 TFT-LCD VFD
价格 ￥4,080 起 $2,160 起

* Note: The above prices and parameters were collected in official website on January 10th, 2024. In case of any discrepancy, the official website shall prevail.

Configure your instrument

Created with Pixso.
Options
Created with Pixso.
Accessories

Models

Add to Compare 产品型号电压电流总功率通道数回读分辨率电压电流测试最高速率可调电流上升/下降速率 Price  

Resources

Created with Pixso.
Contact Us
400-878-0807
Created with Pixso.
Help Center
Created with Pixso.
Support
Hide Created with Pixso.
Created with Pixso. Help
Baidu
map