Contact Us Created with Pixso.
Created with Pixso.
Trial
Created with Pixso.
Resource Center
Created with Pixso.
Issue Reporting
Created with Pixso.
Customer Service
Contact Us
Created with Pixso.

Wide Range Programmable Switching DC Power Supply

SPS6000X Series

SPS6000X

Channel Output

200 V/25 A

/1500 W

Display

3.12-inch OLED Screen

Resolution

10 mV/

10 mA

Created with Pixso.
Created with Pixso.
Created with Pixso. Quote
Created with Pixso. Datasheet

SPS6000X

SPS6000X

Created with Pixso.

Product Introduction

The SPS6000X Series is a programmable switching DC power supply with a wide range of single output and constant power features. This series includes two models, the SPS6225X and SPS6150X, which feature rated output voltages and currents of 200 V / 25 A and 100 V / 50 A, with a maximum output power of 1500 W. Users can connect up-to-five SPS6000X chassis of the same model in parallel to expand the output power to meet different application requirements.

Key Features

  • Rated power：1500 W
  • Wide range of output voltage and current values in a high-efficiency power supply
  • CV, CC priority mode selection, better protection of equipment under test
  • Load transient recovery time (Load change from 50~100%) <2.5ms
  • Equipped with USB, LAN standard, optional USB-GPIB
  • 44 mm (1U) height, 19” width for convenient rack mounting

Product advantage

Wide range input and output

Under the condition of limited output power, the voltage and current ranges are automatically switched, and a variety of voltage and current output combinations can be realized on one power supply. As shown in the figure on the right, two traditional rectangular output power supply can only realize and voltage and current output combination, but one can meet, and can also realize more parameter output in the arc area. Compared with the traditional rectangular output range, the power supply provides a wider voltage and current output range, which greatly improves the utilization of the power supply.

Adjustable Ramp Up/Down Rates for Output Voltage and Current

The SPS6000X power supply supports customized setting of voltage/current ramp up/down, which can verify the performance of the object to be measured during the voltage/current change. The voltage rise/fall slope ranges from 0.001~4V/ms, and the current rise/fall slope ranges from 0.001~2.4A/ms, which can effectively avoid the damage of inrush current to the DUT in special applications, such as the testing of capacitors and strong current absorbing devices. Reduce the harm of inrush current to the load under test.

Efficient and convenient remote control

SPS6000X is equipped with USB, LAN communication interface and optional USB-GPIB module. With the embedded Web Server function, the instrument can be remotely controlled through a browser without the need to install complicated driver software and host computer software, which can more conveniently meet the needs of high-pressure, high-temperature and other special environment applications.
Users can also save various types of files to internal and external memories, which can be read and recalled when needed. All of these are originated from the modernized design language of SPS6000X, which makes the power supply products reach a new height of practicality.

Multiple Protection Functions

CV/CC Priority Mode：Effectively limits the occurrence of inrush current and overshoot voltage.

Self-contained Drain Circuit：When the power is turned off and the load is disconnected, the drain circuit will drain the power from the output filter capacitor. If there is no drain circuit, the output capacitor will remain charged, which may cause danger, the drain circuit can also be used to adjust the voltage drop slope.

Multiple strategic protection modes：The protection functions of the power supply include: over-current protection (OCP), over-voltage protection (OVP), and over-temperature protection (OTP). Entering Limit Power Protection (LPP), the system will start the power-limit mode, and the maximum output power is about 102% of the rated power.

Product parameter

View All Parameters
Created with Pixso.

Configure your instrument

Created with Pixso.
Options
Created with Pixso.
Accessories

Models

Add to Compare ModelsMax single output currentMax single output voltageMax output powerChannelsDisplayResolutionSetting accuracyReadback accuracy Price  

Resources

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB Cable
USB Cable

USB-A to USB-B. Used to connect instrument to PC for communication.

SPS6000X power cord
SPS6000X power cord

16A power cord

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB-GPIB Adapter
USB-GPIB Adapter

Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.

30 A test Lead
30 A test Lead

30 A test Lead

Created with Pixso.
Contact Us
400-878-0807
Created with Pixso.
Help Center
Created with Pixso.
Support

SIGLENT Store

After signing up, you can purchase products in the online store and enjoy membership benefits such as occasional discounts and promotional offers.

Shop Now Created with Pixso.
Hide Created with Pixso.
Created with Pixso. Help
Baidu
map